Email Artikel ini Penggunaan Monomer Asam Itakonat pada Molecularly Imprinted Polymer (MIP)
Abstrak
Molecularly Imprinted Polymer(MIP) merupakan polimer yang dapat mengenali sisi pengenalmolekul targetnya. Aplikasi MIP telah banyak digunakan, antara lain untuk identifikasi antibiotik, pemurnian obat, analisis lingkungan dan makanan. Parameter yang menentukan sifat MIP salah satunya adalah jenis monomer yang digunakan sehingga pemilihannya harus dilakukan dengan hati-hati. Metode yang dapat digunakan dalam penentuan monomer yaitu metode komputasi. Studi ini bertujuan untuk melihat nilai binding energymonomer asam itakonat terhadap berbagai templateyang digunakan pada pembuatan MIP. Berdasarkan hasil review, monomer asam itakonat dapat digunakan untuk templateglibenklamid, andrografolid, deoxynivanelol, MC-LR, dan endotoksin.
Kata kunci:Molecularly Imprinted Polymer(MIP), Asam itakonat
Teks Lengkap:
PDFReferensi
Abdin, M. J., Z. Altintas., dan I. E. Tothill. 2014. In Silico Designed NanoMIP Based Optical Sensor for Endotoxins Monitoring. Biosensors and Bioelectronics. http://dx.doi.org/10.1016/j.bios.2014.08.009.
Ahmadi, F., J. Ahmadi., dan M. Rahimi-Nasrabadi. 2011. Computational Approaches to Design a Molecular Imprinted Polymer for High Selective Extraction of 3,4- methylenedioxymethamphetamine from Plasma. Journal of Chromatography A. 1218 (43): 7739– 7747.
Altintas, Z., B. France., J. O. Ortiz., I. E. Tothil. 2016. Computationally Modelled Receptors for Drug Monitoring Using an Optical Based Biomimetic SPR Sensor. Sensors and Actuators B: Chemical. 726-737.
Bakas, I., N. B. Oujji., E. Moczko., G. Istamboulie., S. Piletsky., E. Piletska., I. Ait-Ichou., E. Ait-Addi., T. Noguer., dan R. Rouillon. 2012. Molecular Imprinting Solid Phase Extraction for Selective Detection of Methidathion in Olive Oil. Analytica Chimica Acta. 99-105.
Chen, C. Y., C. H. Wang., dan A. H. Chen. 2011. Recognation of Molecularly Imprinted Polymer for a Quarternary Alkaloid of Berberine. Talanta. 84: 1038-1046.
Chen, L., S. Xu., dan Jinhua Li. 2011. Recent Advances in Molecular Imprinting Technology: Current Status, Challenges and Highlighted Applications. Chem. Soc. Rev. 40: 2922–2942.
Cheong, W. J., S. H. Yang., dan F. Ali. 2013. Molecular Imprinted Polymers for Separation Science: A Review of Reviews. J. Sep. Sci. 36: 609-628.
Figueiredo, L., G. L. Erny., L. Santos., dan A. Alves. 2016. Applications of Molecularly Imprinted Polymers to the Analysis and Removal of Personal Care Products: A review. Talanta. 146: 754–765.
Guc, M., dan G. Schroeder. 2017. The Molecularly Imprinted Polymers. Influence of Monomers on The Properties of Polymers-A Review. World Journal of Research and Review. 5 (6): 36-47.
Hasanah, A. N., N. Tridessy., N. Wijaya., R. E. Kartasasmita., dan S. Ibrahim. 2014. Study of The Binding Ability of Molecular Imprinted Solid Phase Extraction for Glibenclamide by Optimizing Template: Monomer: Crosslinker Ratio. Int. J. Chem. Sci. 12 (3): 863-870.
Karim, K., F. Breton., R. Rouillon., E. V. Piletska,. A. Guerreiro., I. Chianella., dan S. A. Piletsky. 2005. Monomers for Effective Molecularly Imprinted Polymers. Adv Drug Deliv Rev. 57: 1795–1808.
Kazemi, S., A. Asghar Sarabi., dan M. Abdouss. 2016. Synthesis and Characterization of Magnetic Molecularly Imprinted Polymer Nanoparticles for Controlled Release of Letrozole. Korean J. Chem. Eng. 33: 3289-3297.
Krisnhan, H., K. M. S. Islam., Z. Hamzah., M. N. Ahmad. 2017. Rational Computational Design for the Development of Andrographolide Molecularly Imprinted Polymer. The 2nd International Confrence on Applied Science and Technology 2017. 0200831-7.
Krupadam, R. J., A. Venkatesh., dan S. A. Piletsky. 2013. Molecularly Imprinted Polymer Receptors for Nicotine Recognition in Biological systems. Versita. 27-34.
Krupadam, R. J., G. P. Patel., dan R. Balasubramanian. 2011. Removal of Cyanotoxins from Surface Water Resources Using Reusable Moleculary Imprinted Polymer Adsorbents. Environ Sci Pollut Res. 19: 1841-1851.
Liang, D., Y. Wang., S. Li., Y. Li., M. Zhang., Y. Li., W. Tian., J. Liu., S. Tang., B. Li., dan R. Jin. 2016. Study on Dicyandiamide-Imprinted Polymers with Computer-Aided Design. International Journal of Molecular Sciences. 17: 1-11.
Muhammad, T., L. Cui., W. Jide., E. V. Piletska., A. R. Guerreiro., dan S. A. Piletsky. 2012. Rational Design and Synthesis of Water-Compatible Molecularly Imprinted Polymers for Selective Solid Phase Extraction of Amiodarone. Analytica Chimica Acta. 98-104.
Nurhayati, T., Yanti., I. Royani., Widayani., dan Khairurrijal. 2016. Synthesis and Study of Guest-Rebinding of MIP Based on MAA Prepared using Theophylline Template. Journal of Physics: Confrences Sereies. 739: 1-7.
Pascale, M., A. D. Girolamo., N. Magan., I. Chianella., E. V. Piletska., S. A. Piletsky. 2008. Use of Itaconic Acid-base Polymers for Solid Phase Extraction of Deoxynivalenol and Application to Pasta Analysis. Analytica Chimica Acta. 131-138.
Pernites, R. B., R. R. Ponnapati., dan R. C. Advincula. 2010. Surface Plasmon Resonance (SPR) Detection of Theophylline Via Electropolymerized Molecularly Imprinted Polythiophenes. Macromolecules. 43 (23): 9724-9735.
Uzuriaga-Sánchez, R. J., S. Khan., A. Wong., G. Picasso., M. I. Pividori., dan M. D. P. Taboada-Sotomayor. 2016. Magnetically Separable Polymer (Mag-MIP) for Selective Analysis of Biotin in Food Samples. Food Chemistry. 190: 460–467.
Abdin, M. J., Z. Altintas., dan I. E. Tothill. 2014. In Silico Designed NanoMIP Based Optical Sensor for Endotoxins Monitoring. Biosensors and Bioelectronics. http://dx.doi.org/10.1016/j.bios.2014.08.009.
Ahmadi, F., J. Ahmadi., dan M. Rahimi-Nasrabadi. 2011. Computational Approaches to Design a Molecular Imprinted Polymer for High Selective Extraction of 3,4- methylenedioxymethamphetamine from Plasma. Journal of Chromatography A. 1218 (43): 7739– 7747.
Altintas, Z., B. France., J. O. Ortiz., I. E. Tothil. 2016. Computationally Modelled Receptors for Drug Monitoring Using an Optical Based Biomimetic SPR Sensor. Sensors and Actuators B: Chemical. 726-737.
Bakas, I., N. B. Oujji., E. Moczko., G. Istamboulie., S. Piletsky., E. Piletska., I. Ait-Ichou., E. Ait-Addi., T. Noguer., dan R. Rouillon. 2012. Molecular Imprinting Solid Phase Extraction for Selective Detection of Methidathion in Olive Oil. Analytica Chimica Acta. 99-105.
Chen, C. Y., C. H. Wang., dan A. H. Chen. 2011. Recognation of Molecularly Imprinted Polymer for a Quarternary Alkaloid of Berberine. Talanta. 84: 1038-1046.
Chen, L., S. Xu., dan Jinhua Li. 2011. Recent Advances in Molecular Imprinting Technology: Current Status, Challenges and Highlighted Applications. Chem. Soc. Rev. 40: 2922–2942.
Cheong, W. J., S. H. Yang., dan F. Ali. 2013. Molecular Imprinted Polymers for Separation Science: A Review of Reviews. J. Sep. Sci. 36: 609-628.
Figueiredo, L., G. L. Erny., L. Santos., dan A. Alves. 2016. Applications of Molecularly Imprinted Polymers to the Analysis and Removal of Personal Care Products: A review. Talanta. 146: 754–765.
Guc, M., dan G. Schroeder. 2017. The Molecularly Imprinted Polymers. Influence of Monomers on The Properties of Polymers-A Review. World Journal of Research and Review. 5 (6): 36-47.
Hasanah, A. N., N. Tridessy., N. Wijaya., R. E. Kartasasmita., dan S. Ibrahim. 2014. Study of The Binding Ability of Molecular Imprinted Solid Phase Extraction for Glibenclamide by Optimizing Template: Monomer: Crosslinker Ratio. Int. J. Chem. Sci. 12 (3): 863-870.
Karim, K., F. Breton., R. Rouillon., E. V. Piletska,. A. Guerreiro., I. Chianella., dan S. A. Piletsky. 2005. Monomers for Effective Molecularly Imprinted Polymers. Adv Drug Deliv Rev. 57: 1795–1808.
Kazemi, S., A. Asghar Sarabi., dan M. Abdouss. 2016. Synthesis and Characterization of Magnetic Molecularly Imprinted Polymer Nanoparticles for Controlled Release of Letrozole. Korean J. Chem. Eng. 33: 3289-3297.
Krisnhan, H., K. M. S. Islam., Z. Hamzah., M. N. Ahmad. 2017. Rational Computational Design for the Development of Andrographolide Molecularly Imprinted Polymer. The 2nd International Confrence on Applied Science and Technology 2017. 0200831-7.
Krupadam, R. J., A. Venkatesh., dan S. A. Piletsky. 2013. Molecularly Imprinted Polymer Receptors for Nicotine Recognition in Biological systems. Versita. 27-34.
Krupadam, R. J., G. P. Patel., dan R. Balasubramanian. 2011. Removal of Cyanotoxins from Surface Water Resources Using Reusable Moleculary Imprinted Polymer Adsorbents. Environ Sci Pollut Res. 19: 1841-1851.
Liang, D., Y. Wang., S. Li., Y. Li., M. Zhang., Y. Li., W. Tian., J. Liu., S. Tang., B. Li., dan R. Jin. 2016. Study on Dicyandiamide-Imprinted Polymers with Computer-Aided Design. International Journal of Molecular Sciences. 17: 1-11.
Muhammad, T., L. Cui., W. Jide., E. V. Piletska., A. R. Guerreiro., dan S. A. Piletsky. 2012. Rational Design and Synthesis of Water-Compatible Molecularly Imprinted Polymers for Selective Solid Phase Extraction of Amiodarone. Analytica Chimica Acta. 98-104.
Nurhayati, T., Yanti., I. Royani., Widayani., dan Khairurrijal. 2016. Synthesis and Study of Guest-Rebinding of MIP Based on MAA Prepared using Theophylline Template. Journal of Physics: Confrences Sereies. 739: 1-7.
Pascale, M., A. D. Girolamo., N. Magan., I. Chianella., E. V. Piletska., S. A. Piletsky. 2008. Use of Itaconic Acid-base Polymers for Solid Phase Extraction of Deoxynivalenol and Application to Pasta Analysis. Analytica Chimica Acta. 131-138.
Pernites, R. B., R. R. Ponnapati., dan R. C. Advincula. 2010. Surface Plasmon Resonance (SPR) Detection of Theophylline Via Electropolymerized Molecularly Imprinted Polythiophenes. Macromolecules. 43 (23): 9724-9735.
Uzuriaga-Sánchez, R. J., S. Khan., A. Wong., G. Picasso., M. I. Pividori., dan M. D. P. Taboada-Sotomayor. 2016. Magnetically Separable Polymer (Mag-MIP) for Selective Analysis of Biotin in Food Samples. Food Chemistry. 190: 460–467. Abdin, M. J., Z. Altintas., dan I. E. Tothill. 2014. In Silico Designed NanoMIP Based Optical Sensor for Endotoxins Monitoring. Biosensors and Bioelectronics. http://dx.doi.org/10.1016/j.bios.2014.08.009.
Ahmadi, F., J. Ahmadi., dan M. Rahimi-Nasrabadi. 2011. Computational Approaches to Design a Molecular Imprinted Polymer for High Selective Extraction of 3,4- methylenedioxymethamphetamine from Plasma. Journal of Chromatography A. 1218 (43): 7739– 7747.
Altintas, Z., B. France., J. O. Ortiz., I. E. Tothil. 2016. Computationally Modelled Receptors for Drug Monitoring Using an Optical Based Biomimetic SPR Sensor. Sensors and Actuators B: Chemical. 726-737.
Bakas, I., N. B. Oujji., E. Moczko., G. Istamboulie., S. Piletsky., E. Piletska., I. Ait-Ichou., E. Ait-Addi., T. Noguer., dan R. Rouillon. 2012. Molecular Imprinting Solid Phase Extraction for Selective Detection of Methidathion in Olive Oil. Analytica Chimica Acta. 99-105.
Chen, C. Y., C. H. Wang., dan A. H. Chen. 2011. Recognation of Molecularly Imprinted Polymer for a Quarternary Alkaloid of Berberine. Talanta. 84: 1038-1046.
Chen, L., S. Xu., dan Jinhua Li. 2011. Recent Advances in Molecular Imprinting Technology: Current Status, Challenges and Highlighted Applications. Chem. Soc. Rev. 40: 2922–2942.
Cheong, W. J., S. H. Yang., dan F. Ali. 2013. Molecular Imprinted Polymers for Separation Science: A Review of Reviews. J. Sep. Sci. 36: 609-628.
Figueiredo, L., G. L. Erny., L. Santos., dan A. Alves. 2016. Applications of Molecularly Imprinted Polymers to the Analysis and Removal of Personal Care Products: A review. Talanta. 146: 754–765.
Guc, M., dan G. Schroeder. 2017. The Molecularly Imprinted Polymers. Influence of Monomers on The Properties of Polymers-A Review. World Journal of Research and Review. 5 (6): 36-47.
Hasanah, A. N., N. Tridessy., N. Wijaya., R. E. Kartasasmita., dan S. Ibrahim. 2014. Study of The Binding Ability of Molecular Imprinted Solid Phase Extraction for Glibenclamide by Optimizing Template: Monomer: Crosslinker Ratio. Int. J. Chem. Sci. 12 (3): 863-870.
Karim, K., F. Breton., R. Rouillon., E. V. Piletska,. A. Guerreiro., I. Chianella., dan S. A. Piletsky. 2005. Monomers for Effective Molecularly Imprinted Polymers. Adv Drug Deliv Rev. 57: 1795–1808.
Kazemi, S., A. Asghar Sarabi., dan M. Abdouss. 2016. Synthesis and Characterization of Magnetic Molecularly Imprinted Polymer Nanoparticles for Controlled Release of Letrozole. Korean J. Chem. Eng. 33: 3289-3297.
Krisnhan, H., K. M. S. Islam., Z. Hamzah., M. N. Ahmad. 2017. Rational Computational Design for the Development of Andrographolide Molecularly Imprinted Polymer. The 2nd International Confrence on Applied Science and Technology 2017. 0200831-7.
Krupadam, R. J., A. Venkatesh., dan S. A. Piletsky. 2013. Molecularly Imprinted Polymer Receptors for Nicotine Recognition in Biological systems. Versita. 27-34.
Krupadam, R. J., G. P. Patel., dan R. Balasubramanian. 2011. Removal of Cyanotoxins from Surface Water Resources Using Reusable Moleculary Imprinted Polymer Adsorbents. Environ Sci Pollut Res. 19: 1841-1851.
Liang, D., Y. Wang., S. Li., Y. Li., M. Zhang., Y. Li., W. Tian., J. Liu., S. Tang., B. Li., dan R. Jin. 2016. Study on Dicyandiamide-Imprinted Polymers with Computer-Aided Design. International Journal of Molecular Sciences. 17: 1-11.
Muhammad, T., L. Cui., W. Jide., E. V. Piletska., A. R. Guerreiro., dan S. A. Piletsky. 2012. Rational Design and Synthesis of Water-Compatible Molecularly Imprinted Polymers for Selective Solid Phase Extraction of Amiodarone. Analytica Chimica Acta. 98-104.
Nurhayati, T., Yanti., I. Royani., Widayani., dan Khairurrijal. 2016. Synthesis and Study of Guest-Rebinding of MIP Based on MAA Prepared using Theophylline Template. Journal of Physics: Confrences Sereies. 739: 1-7.
Pascale, M., A. D. Girolamo., N. Magan., I. Chianella., E. V. Piletska., S. A. Piletsky. 2008. Use of Itaconic Acid-base Polymers for Solid Phase Extraction of Deoxynivalenol and Application to Pasta Analysis. Analytica Chimica Acta. 131-138.
Pernites, R. B., R. R. Ponnapati., dan R. C. Advincula. 2010. Surface Plasmon Resonance (SPR) Detection of Theophylline Via Electropolymerized Molecularly Imprinted Polythiophenes. Macromolecules. 43 (23): 9724-9735.
Uzuriaga-Sánchez, R. J., S. Khan., A. Wong., G. Picasso., M. I. Pividori., dan M. D. P. Taboada-Sotomayor. 2016. Magnetically Separable Polymer (Mag-MIP) for Selective Analysis of Biotin in Food Samples. Food Chemistry. 190: 460–467.
Abdin, M. J., Z. Altintas., dan I. E. Tothill. 2014. In Silico Designed NanoMIP Based Optical Sensor for Endotoxins Monitoring. Biosensors and Bioelectronics. http://dx.doi.org/10.1016/j.bios.2014.08.009.
Ahmadi, F., J. Ahmadi., dan M. Rahimi-Nasrabadi. 2011. Computational Approaches to Design a Molecular Imprinted Polymer for High Selective Extraction of 3,4- methylenedioxymethamphetamine from Plasma. Journal of Chromatography A. 1218 (43): 7739– 7747.
Altintas, Z., B. France., J. O. Ortiz., I. E. Tothil. 2016. Computationally Modelled Receptors for Drug Monitoring Using an Optical Based Biomimetic SPR Sensor. Sensors and Actuators B: Chemical. 726-737.
Bakas, I., N. B. Oujji., E. Moczko., G. Istamboulie., S. Piletsky., E. Piletska., I. Ait-Ichou., E. Ait-Addi., T. Noguer., dan R. Rouillon. 2012. Molecular Imprinting Solid Phase Extraction for Selective Detection of Methidathion in Olive Oil. Analytica Chimica Acta. 99-105.
Chen, C. Y., C. H. Wang., dan A. H. Chen. 2011. Recognation of Molecularly Imprinted Polymer for a Quarternary Alkaloid of Berberine. Talanta. 84: 1038-1046.
Chen, L., S. Xu., dan Jinhua Li. 2011. Recent Advances in Molecular Imprinting Technology: Current Status, Challenges and Highlighted Applications. Chem. Soc. Rev. 40: 2922–2942.
Cheong, W. J., S. H. Yang., dan F. Ali. 2013. Molecular Imprinted Polymers for Separation Science: A Review of Reviews. J. Sep. Sci. 36: 609-628.
Figueiredo, L., G. L. Erny., L. Santos., dan A. Alves. 2016. Applications of Molecularly Imprinted Polymers to the Analysis and Removal of Personal Care Products: A review. Talanta. 146: 754–765.
Guc, M., dan G. Schroeder. 2017. The Molecularly Imprinted Polymers. Influence of Monomers on The Properties of Polymers-A Review. World Journal of Research and Review. 5 (6): 36-47.
Hasanah, A. N., N. Tridessy., N. Wijaya., R. E. Kartasasmita., dan S. Ibrahim. 2014. Study of The Binding Ability of Molecular Imprinted Solid Phase Extraction for Glibenclamide by Optimizing Template: Monomer: Crosslinker Ratio. Int. J. Chem. Sci. 12 (3): 863-870.
Karim, K., F. Breton., R. Rouillon., E. V. Piletska,. A. Guerreiro., I. Chianella., dan S. A. Piletsky. 2005. Monomers for Effective Molecularly Imprinted Polymers. Adv Drug Deliv Rev. 57: 1795–1808.
Kazemi, S., A. Asghar Sarabi., dan M. Abdouss. 2016. Synthesis and Characterization of Magnetic Molecularly Imprinted Polymer Nanoparticles for Controlled Release of Letrozole. Korean J. Chem. Eng. 33: 3289-3297.
Krisnhan, H., K. M. S. Islam., Z. Hamzah., M. N. Ahmad. 2017. Rational Computational Design for the Development of Andrographolide Molecularly Imprinted Polymer. The 2nd International Confrence on Applied Science and Technology 2017. 0200831-7.
Krupadam, R. J., A. Venkatesh., dan S. A. Piletsky. 2013. Molecularly Imprinted Polymer Receptors for Nicotine Recognition in Biological systems. Versita. 27-34.
Krupadam, R. J., G. P. Patel., dan R. Balasubramanian. 2011. Removal of Cyanotoxins from Surface Water Resources Using Reusable Moleculary Imprinted Polymer Adsorbents. Environ Sci Pollut Res. 19: 1841-1851.
Liang, D., Y. Wang., S. Li., Y. Li., M. Zhang., Y. Li., W. Tian., J. Liu., S. Tang., B. Li., dan R. Jin. 2016. Study on Dicyandiamide-Imprinted Polymers with Computer-Aided Design. International Journal of Molecular Sciences. 17: 1-11.
Muhammad, T., L. Cui., W. Jide., E. V. Piletska., A. R. Guerreiro., dan S. A. Piletsky. 2012. Rational Design and Synthesis of Water-Compatible Molecularly Imprinted Polymers for Selective Solid Phase Extraction of Amiodarone. Analytica Chimica Acta. 98-104.
Nurhayati, T., Yanti., I. Royani., Widayani., dan Khairurrijal. 2016. Synthesis and Study of Guest-Rebinding of MIP Based on MAA Prepared using Theophylline Template. Journal of Physics: Confrences Sereies. 739: 1-7.
Pascale, M., A. D. Girolamo., N. Magan., I. Chianella., E. V. Piletska., S. A. Piletsky. 2008. Use of Itaconic Acid-base Polymers for Solid Phase Extraction of Deoxynivalenol and Application to Pasta Analysis. Analytica Chimica Acta. 131-138.
Pernites, R. B., R. R. Ponnapati., dan R. C. Advincula. 2010. Surface Plasmon Resonance (SPR) Detection of Theophylline Via Electropolymerized Molecularly Imprinted Polythiophenes. Macromolecules. 43 (23): 9724-9735.
Uzuriaga-Sánchez, R. J., S. Khan., A. Wong., G. Picasso., M. I. Pividori., dan M. D. P. Taboada-Sotomayor. 2016. Magnetically Separable Polymer (Mag-MIP) for Selective Analysis of Biotin in Food Samples. Food Chemistry. 190: 460–467. Abdin, M. J., Z. Altintas., dan I. E. Tothill. 2014. In Silico Designed NanoMIP Based Optical Sensor for Endotoxins Monitoring. Biosensors and Bioelectronics. http://dx.doi.org/10.1016/j.bios.2014.08.009.
Ahmadi, F., J. Ahmadi., dan M. Rahimi-Nasrabadi. 2011. Computational Approaches to Design a Molecular Imprinted Polymer for High Selective Extraction of 3,4- methylenedioxymethamphetamine from Plasma. Journal of Chromatography A. 1218 (43): 7739– 7747.
Altintas, Z., B. France., J. O. Ortiz., I. E. Tothil. 2016. Computationally Modelled Receptors for Drug Monitoring Using an Optical Based Biomimetic SPR Sensor. Sensors and Actuators B: Chemical. 726-737.
Bakas, I., N. B. Oujji., E. Moczko., G. Istamboulie., S. Piletsky., E. Piletska., I. Ait-Ichou., E. Ait-Addi., T. Noguer., dan R. Rouillon. 2012. Molecular Imprinting Solid Phase Extraction for Selective Detection of Methidathion in Olive Oil. Analytica Chimica Acta. 99-105.
Chen, C. Y., C. H. Wang., dan A. H. Chen. 2011. Recognation of Molecularly Imprinted Polymer for a Quarternary Alkaloid of Berberine. Talanta. 84: 1038-1046.
Chen, L., S. Xu., dan Jinhua Li. 2011. Recent Advances in Molecular Imprinting Technology: Current Status, Challenges and Highlighted Applications. Chem. Soc. Rev. 40: 2922–2942.
Cheong, W. J., S. H. Yang., dan F. Ali. 2013. Molecular Imprinted Polymers for Separation Science: A Review of Reviews. J. Sep. Sci. 36: 609-628.
Figueiredo, L., G. L. Erny., L. Santos., dan A. Alves. 2016. Applications of Molecularly Imprinted Polymers to the Analysis and Removal of Personal Care Products: A review. Talanta. 146: 754–765.
Guc, M., dan G. Schroeder. 2017. The Molecularly Imprinted Polymers. Influence of Monomers on The Properties of Polymers-A Review. World Journal of Research and Review. 5 (6): 36-47.
Hasanah, A. N., N. Tridessy., N. Wijaya., R. E. Kartasasmita., dan S. Ibrahim. 2014. Study of The Binding Ability of Molecular Imprinted Solid Phase Extraction for Glibenclamide by Optimizing Template: Monomer: Crosslinker Ratio. Int. J. Chem. Sci. 12 (3): 863-870.
Karim, K., F. Breton., R. Rouillon., E. V. Piletska,. A. Guerreiro., I. Chianella., dan S. A. Piletsky. 2005. Monomers for Effective Molecularly Imprinted Polymers. Adv Drug Deliv Rev. 57: 1795–1808.
Kazemi, S., A. Asghar Sarabi., dan M. Abdouss. 2016. Synthesis and Characterization of Magnetic Molecularly Imprinted Polymer Nanoparticles for Controlled Release of Letrozole. Korean J. Chem. Eng. 33: 3289-3297.
Krisnhan, H., K. M. S. Islam., Z. Hamzah., M. N. Ahmad. 2017. Rational Computational Design for the Development of Andrographolide Molecularly Imprinted Polymer. The 2nd International Confrence on Applied Science and Technology 2017. 0200831-7.
Krupadam, R. J., A. Venkatesh., dan S. A. Piletsky. 2013. Molecularly Imprinted Polymer Receptors for Nicotine Recognition in Biological systems. Versita. 27-34.
Krupadam, R. J., G. P. Patel., dan R. Balasubramanian. 2011. Removal of Cyanotoxins from Surface Water Resources Using Reusable Moleculary Imprinted Polymer Adsorbents. Environ Sci Pollut Res. 19: 1841-1851.
Liang, D., Y. Wang., S. Li., Y. Li., M. Zhang., Y. Li., W. Tian., J. Liu., S. Tang., B. Li., dan R. Jin. 2016. Study on Dicyandiamide-Imprinted Polymers with Computer-Aided Design. International Journal of Molecular Sciences. 17: 1-11.
Muhammad, T., L. Cui., W. Jide., E. V. Piletska., A. R. Guerreiro., dan S. A. Piletsky. 2012. Rational Design and Synthesis of Water-Compatible Molecularly Imprinted Polymers for Selective Solid Phase Extraction of Amiodarone. Analytica Chimica Acta. 98-104.
Nurhayati, T., Yanti., I. Royani., Widayani., dan Khairurrijal. 2016. Synthesis and Study of Guest-Rebinding of MIP Based on MAA Prepared using Theophylline Template. Journal of Physics: Confrences Sereies. 739: 1-7.
Pascale, M., A. D. Girolamo., N. Magan., I. Chianella., E. V. Piletska., S. A. Piletsky. 2008. Use of Itaconic Acid-base Polymers for Solid Phase Extraction of Deoxynivalenol and Application to Pasta Analysis. Analytica Chimica Acta. 131-138.
Pernites, R. B., R. R. Ponnapati., dan R. C. Advincula. 2010. Surface Plasmon Resonance (SPR) Detection of Theophylline Via Electropolymerized Molecularly Imprinted Polythiophenes. Macromolecules. 43 (23): 9724-9735.
Uzuriaga-Sánchez, R. J., S. Khan., A. Wong., G. Picasso., M. I. Pividori., dan M. D. P. Taboada-Sotomayor. 2016. Magnetically Separable Polymer (Mag-MIP) for Selective Analysis of Biotin in Food Samples. Food Chemistry. 190: 460–467.
DOI: https://doi.org/10.24198/jf.v16i1.17447
DOI (PDF): https://doi.org/10.24198/jf.v16i1.17447.g8636
Refbacks
- Saat ini tidak ada refbacks.
Sitasi manajer:
Jurnal ini diindeks dalam:
Farmaka by Universitas Padjadjaran is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License
Copyright © 2013 Jurnal Farmaka - All Right Reserved