Comparison of shear bond strength of etch and rinse, self-etch adhesive system followed by flowable composite resin, and self-adherent composite resin
Abstract
Introduction: The adhesive system strongly influences the bond strength of resin composite to the tooth surface. Aside from the commonly used etch and rinse, and self-etch adhesive system and a new approach called self-adherent composite resin to combine the adhesive system to the composite material. This study was aimed to compare the shear bond strength of two adhesive systems, (etch and rinse, self-etch adhesive system) followed by application of a flowable composite resin to a self-adherent resin composite. Methods: This study was experimental consisted of three groups of treatment, G1 (etch and rinse adhesive system+composite resin); G2 (self-etch adhesive system+composite resin), and G3 (self-adherent composite resin). Samples were 27 dentinal surfaces from premolar teeth bonded to composite resin (3 mm diameter and 3 mm in height), according to ISO technical specification No 11405. Shear bond strength test was performed using Universal Testing Machine (UTM) under the load of 50 kgf, and the crosshead speed of 0.5 mm/min, and the data was analysed by one-way ANOVA afterwards. Results: The highest bond strength to dentin was seen in Group 1 (14.89 MPa) followed by Group 2 (11.65 MPa) and Group 3 (11.22 MPa) with no significant difference between the three groups p value =0.117 (p>0.05). Conclusion: The etch and rinse adhesive system had the highest shear bond strength to dentin, followed by the self-etch and the self-adherent composite resin. However, the shear bond strength of all tested groups was comparable.
Keywords
Full Text:
PDFReferences
Hashimoto M, de Gee AJ, Feilzer AJ. Polymerization contraction stress in dentin adhesives bonded to dentin and enamel. Dent Mater. 2008; 24(10): 1304-10. DOI: 10.1016/j.dental.2008.02.008
Van Meerbeek B, Peumans M, Poitevin A, Mine A, Van Ende A, Neves A, et al. Relationship between bond strength and clinical outcomes. Dent Mater. 2010; 26(2): e100-21. DOI: 10.1016/j.dental.2009.11.148
Van Meerbeek B, Yoshihara K, Yoshida Y, Mine A, De Munck J, Van Landuyt KL. State of the art of self-etch adhesive. Dent Mater. 2011; 27(1): 17-28. DOI: 10.1016/j.dental.2010.10.023
Peumans M, De Munck J, Van Landuyt K, Van Meerbeek B. Thirteen-year randomized controlled clinical trial of a two-step self-etch adhesive in non-carious cervical lesions. Dent Mater 2015; 31(3): 308–14. DOI: 10.1016/j.dental.2015.01.005
Giannini M, Makishi P, Ayres APA, Vermelho PM, Fronza BM, Nikaido T, et al. Self etch adhesive systems: A literature review. Braz Dent J. 2015; 26(1): 3-10. DOI: 10.1590/0103-6440201302442
Garcia RN, Morelli AE, da Silva BS, Giongo BM, Pollheim CP, Largura GS, et al. Bonding performance of a self-adhering flowable composite to substrated used in direct technique. Rev Sul Bras Odontol. 2013; 10(4): 343-9.
Abdelraouf RM, Mohammed M, Abdelgawad F. Evaluation of shear-bond-strength of dental self-adhering flowable resin-composite versus total-etch one to enamel and dentin surface: An in-vitro study. Open Access Maced J Med Sci. 2019; 7(13): 2162-6. DOI: 10.3889/oamjms.2019.579
Vichi A, Margvelashvili M, Goracci C, Papacchini F, Ferrari M. Bonding and sealing ability of a new self-adhering flowable composite resin in class I restorations. Clin Oral Investig. 2013; 17(6): 1497-506. DOI: 10.1007/s00784-012-0846-6
Poitevin A, De Munck J, Van Ende A, Suyama Y, Mine A, Peumans M, et al. Bonding effectiveness of self-adhesive composites to dentin and enamel. Dent Mater. 2013; 29(2): 221-30. DOI: 10.1016/j.dental.2012.10.001
Sachdeva P, Goswami M, Singh D. Comparative evaluation of shear bond strength and nanoleakage of conventional and self adhering flowable composite to primary teeth dentin. Contemp Clin Dent. 2016; 7(3): 326-31. DOI: 10.4103/0976-237X.188549
Peumans M, De Munck J, Van Landuyt K, Van Meerbeek B. Thirteen-year randomized controlled clinical trial of a two-step self-etch adhesive in non-carious cervical lesions. Dent Mater 2015; 31(3): 308–14. DOI: 10.1016/j.dental.2015.01.005
Burke FJT, Hussain A, Nolan L, Fleming GJP. Methods used in dentine bonding tests: An analysis of 102 investigations on bond strength. Eur J Prosthodont Rest Dent. 2008; 16(4): 158–65.
van Dijken JWV, Pallesen U. Eight-year randomized clinical evaluation of class II nanohybrid resin composite restorations bonded with a one-step self-etch or a two-step etch-and-rinse adhesive. Clin Oral Investig. 2015; 19(6): 1371–9. DOI: 10.1007/s00784-014-1345-8
Boushell LW, Heymann HO, Ritter AV, Sturdevant JR, Swift Jr EJ, Wilder Jr AD, et al. Six-year clinical performance of etch-and-rinse and self-etch adhesives. Dent Mater. 2016; 32(9): 1065-72. DOI: 10.1016/j.dental.2016.06.003
Yamauchi K, Tsujimoto A, Jurado CA, Shimatani Y, Nagura Y, Takamizawa T, et al. Etch-and-rinse vs self-etch mode for dentin bonding effectiveness of universal adhesives. J Oral Sci. 2019; 61(4): 549-53. DOI: 10.2334/josnusd.18-0433
Sugimura R, Tsujimoto A, Hosoya Y, Fischer NG, Barkmeier WW, Takamizawa T, et al. Surface moisture influence on etch-and-rinse universal adhesive bonding. Am J Dent. 2019; 32(1): 33-8.
Boushell LW, Heymann HO, Ritter AV, Sturdevant JR, Swift Jr EJ, Wilder Jr AD, et al. Six-year clinical performance of etch-and-rinse and self-etch adhesives. Dent Mater. 2016; 32(9): 1065-72. DOI: 10.1016/j.dental.2016.06.003
Shafiei F, Saadat M. Micromorphology and bond strength evaluation of adhesive interface of a self-adhering flowable composite resin-dentin: Effect of surface treatment. Microsc Res Tech. 2016; 79(5): 403-7. DOI: 10.1002/jemt.22643
Peterson J, Rizk M, Hoch M, Wiegand A. Bonding performance of self-adhesive flowable composites to enamel, dentin and a nano-hybrid composite. Odontology. 2018; 106(2): 171-80. DOI: 10.1007/s10266-017-0324-3
Tuloglu N, Tunc ES, Ozer S, Bayrak S. Shear bond strength of self-adhering flowable composite on dentin with and without application of an adhesive system. J Appl Biomater Funct Mater. 2014; 12(2): 97-101. DOI: 10.5301/jabfm.5000166
Giannini M, Makishi P, Ayres APA, Vermelho PM, Fronza BM, Nikaido T, et al. Self etch adhesive systems: A literature review. Braz Dent J. 2015; 26(1): 3-10. DOI: 10.1590/0103-6440201302442
Tulunoglu O, Tulunoglu I. Resin-dentin interfacial morphology and shear bond strengths to primary dentin after long-term water storage: An in vitro study. Quintessence Int. 2008; 39(5): 427-37.
Malhotra N, Mala K. Light-curing considerations for resin-based composite materials: A review. Part I. Compend Contin Educ Dent. 2010; 31(7): 498-505.
Reis A, Pellizzaro A, Dal-Bianco K, Gones OM, Patzlaff R, Loguercio AD. Impact of adhesive ap-plication to wet and dry dentin on long-term resin-dentin bond strengths. Oper Dent. 2007; 32(4): 380-7. DOI: 10.2341/06-107
DOI: https://doi.org/10.24198/pjd.vol32no3.27989
Refbacks
- There are currently no refbacks.
Visitor Stat
Padjadjaran Journal of Dentistry is licensed under Creative Commons Attribution 4.0 International License