Characterization of Imprinted Polymer of Diazepam With Methacrylic Acid and Hydroxyethyl Methacrylate Monomer in Chloroform for Selective Adsorption of Diazepam

Michelle Ferdinand; Rimadani Pratiwi; Aliya Nur Hasanah

doi:10.24198/ijpst.v7i2.26230

Characterization of Imprinted Polymer of Diazepam With Methacrylic Acid and Hydroxyethyl Methacrylate Monomer in Chloroform for Selective Adsorption of Diazepam

Michelle Ferdinand, Rimadani Pratiwi, Aliya Nur Hasanah

Abstrak

Diazepam is a benzodiazepine class usage is regulated nationally or globally. These drugs can be used to regulate sleep patterns or sedative-hypnotic drugs because it has a calming effect. Monitoring the abuse of diazepam requires a sensitive analysis methods that required the preparation of selective methods. One of the methods that are currently developing is Moleculary Imprinted Polymer-Solid Phase Extraction (MI-SPE). In this research, step being performed include determination of the association constant, synthesis sorbent of Imprinted Polymer (IP) diazepam by bulkpolymerization method with diazepam as a template, chloroform as porogen, two kind of monomer methacrylic acid (MAA) and hydroxyethyl methacrylate (HEMA) as functional monomer. Templates extracted from polymer followed by evaluation of adsorption ability test, a test of capacity and selectivity of the polymer, and also the characterization of the IP using Fourier Transform Infra-Red (FTIR),and Scanning Electron Microscope (SEM). The results showed that IP diazepam with MAA monomer has 7.95 x 10^-5 mg/g of capacity, it is better than capacity of IP diazepam monomer HEMA with 7.47x 10^-6 mg/g. Selectivity of IP diazepam MAA monomer has an IF value which is 2.13, which is better than IP HEMA with 1.21. In addition, IP diazepam MAA monomer more heterogenous than its Non Imprinted Polymer (NIP).

Keywords: Chloroform, Diazepam, HEMA, Methacrylic acid, MI-SPE.

Teks Lengkap:

PDF

Referensi

DiPiro, J.T., Wells,B.G., Schwinghammer, T.L. & DiPiro, C.V., Pharmacotherapy Handbook. 9th Ed., New York : Mc Graw Hill. 2015. 148-155

Fu, X.W., Yang, Q., Zhou, Q., Lin.Q., and Wang, C. Template-Monomer Interaction in Molecular Imprinting: Is the Strongest the Best?. Open Journal of Organic Polymer Materials, 2015; 5:58-68

Jann, M., Kennedy, WK., Lopez, G. , Benzodiazepines : a major component in unintentional prescription drugs overdosis with analgesics,Journal Pharmacy Practise, 2014; 27 (1): 5-16. https://doi.org/10.1177/0897190013515001

BPOM, RI. 2016. Laporan Tahunan Tersedia online melalui website www.pom.go.id/new/admin/dat/20171127/laptah2016.pdf [diakses pada tanggal 29 Juli 2019]. 2016. 91.

Mikomangwa, Wilgilya Padili, Nassoro A. Madende, Manase Kilonzi, Hamu Joseph Mlyuka, Pacifique Ndayishimiye, Alphonce Ignace Marealle, and Ritah Mutagonda. Unlawful dispensing practice of diazepam: a simulated client approach in community pharmacies in the north-west of Dar-esSalaam region, Tanzania. BMC Health Services Research, 2019; 19 (571). http://doi.org/10.1186/s12913-019-4421-6

Jones, AW., and Holmgren, A. Concentrations of Diazepam and Nordiazepam in 1000 Blood Samples From Apprehended Drivers—Therapeutic Use or Abuse of Anxiolytics?. Journal of Pharmacy Practice, 2012; 26 (3): 198–203. https://doi.org/10.1177/0897190012451910

Uzun, L., Uzek R., Senel, S., Say R. Denizli., A. Chiral recognition of proteins having L-histidine residues on the surface with lanthanide ion complex incorporatedmolecularly imprinted fluorescent nanoparticles. Mater Sci. Eng. C Vol. 2014; 33: 3432-3439.

Yanti, T Nurhayati, I Royani, Widayani, and Khairurrijal. Synthesis and characterization of MAA-based molecularly imprinted polymer (MIP) with D-glucose template. Journal of Physics: Conference Series 2016; 739. (1):1-7. https://doi.org/10.1088/1742-6596/739/1/012143

Yang, S., Yonghui W., Yingda J., Shuang L., and Wei L. Molecularly Imprinted Polymers for the Identification and Separation of Chiral Drugs and Biomolecules. Polymers, 2016; 8(216) :1-16. https://doi.org/10.3390/polym8060216

Surikumaran, H., Sarifah M., and Norazilawati MS. Molecular Imprinted Polymer of Methacrylic Acid Functionalised β-Cyclodextrin for Selective Removal of 2,4-Dichlorophenol. Int. J. Mol. Sci. 2014; 15: 6111-6136. https://doi.org/10.3390/ijms15046111

Gursoy, M., Ucar T., Tosun, Z., and Karaman M. Initiation of 2-Hydroxyethyl Methacrylate Polymerization by Tert-Butyl Peroxide in a Planar PECVD System. Plasma Processes and Polymer, 2016:13 (4): 438-446. https://doi.org/10.1002/ppap.201500091

Thordarson, Pall. Determining association constants from titration experiments in supramolecular chemistry. Chem. Soc. Rev.. 2011;40:1305-1323. https://doi.org/10.1039/c0cs00062k.

Nurhayati, T., Yanti, I. Royani, Widayani dan Khairurrijal. Syntesis and Study of Guest-Rebinding of MIP Based on MAA Prepared using Theophylline Template. Journal of Physics : Conference Series. 2016; 739: 1-7. https://doi.org/10.1088/1742-6596/739/1/012127

Ansari, Saeedeh, and A. Ghorbani. Moleculary Imprinted Polymers (MIP) for Selective Solid Phase Extraction of Celecoxib in Urine Sampeles Followed by High Performance Liquid Chromatography. Journal of Chemical Health Risks. 2017; 7 http//:doi.org/10.22034/JCHR.2017.544184

Hasanah, A.N., Rahmana E.K dan Slamet I. Synthesis and Application of Glibenclamide Imprinted Polymer for Solid Phase Extraction in Serum Samples Using Itaconic Acid as Functional Monomer. Journal of Applied Sciences. 2015; 15 (11): 1288-1296. https://doi.org/10.3923/jas.2015.1288.1296

Hasanah, A. N., Tridessy, N., Wijaya, N., Kartasasmita, R.E., Ibrahim, S., others. Study of The Binding Ability of Molecular Imprinted Solid Phase Extraction for Glibenclamide by Optimizing Template: Monomer: Crosslinker Ratio. Int. J. Chem. Sci. 2014;12 (3): 863-870. ISSN 0972-768X

Nguyen, J. N. T. and Harbison A. M., Scanning Electron Microscopy Sample Preparation and Imaging. Method Mol. Biol. 2017;1606:71-84. http://doi.org/10.1007/978-1-4939-6990-6_5.

Umpleby, R.J. II., Baxter SC, Rampey AM, Rushton GR, Chen Y and Shimizu KD. Characterization of the heterogeneous binding site affinity distributions in molecularly imprinted polymers. J Chromatogr B Analyt Technol Biomed Life Sci. 2004; 804 (1) : 141-149. https://doi.org/10.1016/j.jchromb.2004.01.064

Pataer, P., Turghun M., Yunusjan T., Wenwi Y., Sailemayi A., Muyasier W., and Lingxin Xhen. Preparation of a stoichiometric molecularly imprinted polymer for auramine O and application in solid-phase extraction. Journal of Separation Science 2019; 42 :1634-1643. https://doi.org/10.1002/jssc.201801234

Yan, H., and Kyung Ho Row. Characteristic and Synthetic Approach of Molecularly Imprinted Polymer. Int. J. Mol. Sci. 2006; 7: 155-178. https://doi.org/10.3390/i7050155

Vasapollo, G., Robert Del S., Lucia M., Maria R., Anna S., Sonia S., and Giuseppe M. Molecularly Imprinted Polymers: Present and Future Prospective. Int. J. Mol. Sci. 2011; 12: 5908-5945. https://doi.org/10.3390/ijms12095908

Azalina, MN., K L Chua, and I Noorhidayah. Theoretical and experimental study of valine molecular imprinted polymer using sol-gel process on silica microparticles surface. IOP Conf. Ser.: Mater. Sci. Eng. 2018; 458: 012012. https://doi.org/10.1088/1757-899X/458/1/012012

Chen, Lingxin., Shoufang Xu, and Jinhua Li.. Recent advances in molecular imprinting technology: current status, challenges and highlighted applications. Chem. Soc. Rev. 2011; 40:2922-2942. https://doi.org/10.1039/C0CS00084A

Amin, S., Sophi D., and Slamet Ibrahim. Interaction Study, Synthesis and Characterization of Molecular Imprinted Polymer Using Functional Monomer Methacrylate Acid and Dimethylamylamine as Template Molecule. Jurnal Ilmu Kefarmasian Indonesia 2018; 16(1):12-19. https://doi.org/10.35814/jifi.v16i1.430

Shikuku, VO., Renato Z., Chrispin OK., Filipe FD., Nelson MGB., and Osmar DP. Single and binary adsorption of sulfonamide antibiotics onto iron-modified clay: linear and nonlinear isotherms, kinetics, thermodynamics, and mechanistic studies. Applied Water Science, 2018;8 (6):133 https://doi.org/10.1007/s13201-018-0825-4

Hasanah, A.N., Traju Ningtias D.U., and Rimadani P. Synthesis of Atenolol-Imprinted Polymers with Methyl Methacrylateas Functional Monomer in Propanol Using Bulk and Precipitation Polymerization Method. Journal of Analytical Methods in Chemistry 2019;Volume 2019: 1-7. https://doi.org/10.1155/2019/9853620

Ayawei, N., Augustus NE., and Donbebe W. Modelling and Interpretation of Adsorption Isoterm. Journal of Chemistry, 2017;1: 1-11. https://doi.org/10.1155/2017/3039817

Bachtiar, A., Showkat AB., and Syed RS. Synthesis and characterization of molecular imprinting polymer for the removal of 2-phenylphenol from spiked blood serum and river water. Chem. Biol. Technol. Agric. 2019; 6 (15) : 2-10.https://doi.org/10.1186/s40538-019-0152-5

Bhawani,SA., Tham Soon S., and Mohammad Nasir MI. Synthesis of molecular imprinting polymers for extraction of gallic acid from urine. Chemistry Central Journal, 2018;12 (19): 334. https://doi.org/10.1186/s13065-018-0392-7

Kumbar, S., Laurencin, C. and Deng, M. Natural and Synthetic Biomedical Polymers. Elsevier Science. 2014.

DOI: https://doi.org/10.24198/ijpst.v7i2.26230