Perbandingan dimensi vertikal oklusal sebelum dan setelah insersi gigi tiruan lengkap dengan metode Niswonger dan radiografi sefalometri  Comparison of occlusal vertical dimension before and after complete denture insertion using Niswonger and cephalometric radiography methods

Annida Fatiya Zahra; Ady Soesetijo; Fanni Kusuma Djati

doi:10.24198/jkg.v31i1.18536

Perbandingan dimensi vertikal oklusal sebelum dan setelah insersi gigi tiruan lengkap dengan metode Niswonger dan radiografi sefalometri
Comparison of occlusal vertical dimension before and after complete denture insertion using Niswonger and cephalometric radiography methods

Annida Fatiya Zahra, Ady Soesetijo, Fanni Kusuma Djati

Abstract

Pendahuluan: Konstruksi Gigi Tiruan Lengkap (GTL) perlu memperhatikan dimensi vertikal yang dibagi menjadi Dimensi Vertikal Oklusal (DVO) dan Dimensi Vertikal Fisiologis (DVF). Metode penentuan DVO yang dianggap relevan untuk masyarakat Indonesia adalah metode Niswonger dan radiografi sefalometri. Tujuan penelitian adalah untuk menganalisis DVO sebelum dan setelah insersi GTL dengan pendekatan metode Niswonger dan radiografi sefalometri. Metode: Jenis penelitian ini adalah kuantitatif dengan metode observasional analitik dengan rancangan studi cross sectional. Sampel adalah pasien di Rumah Sakit Gigi dan Mulut (RSGM) Universitas Jenderal Soedirman (Unsoed) Purwokerto yang dipilih dengan metode purposive total sampling sesuai dengan kriteria inklusi dan eksklusi. Seluruh subjek penelitian dilakukan pengukuran DVO sebelum insersi GTL menggunakan metode Niswonger dan radiografi sefalometri. Setelah tahapan prosedur pembuatan GTL selesai dan dilakukan insersi maka dihitung kembali DVO paska insersi menggunakan metode yang sama. Hasil pengukuran DVO sebelum dan setelah insersi gigi tiruan lengkap dibandingkan dan dianalisis. Hasil: Hasil uji dependent t-test menunjukkan adanya perbedaan yang signifikan antara DVO sebelum dan setelah insersi gigi tiruan lengkap pada pendekatan metode Niswonger dan radiografi sefalometri (p < 0,05). Simpulan: Terdapat penurunan dimensi vertikal oklusal sebelum dan setelah insersi GTL dengan pendekatan metode Niswonger dan radiografi sefalometri.

Kata kunci: Gigi tiruan lengkap, dimensi vertikal oklusal, metode Niswonger, metode radiografi sefalometri.

ABSTRACT

Introduction: Construction of complete denture needs to be emphasised on the vertical dimensions which are divided into Occlusal Vertical Dimensions (OVD) and Physiological Vertical Dimensions (PVD). The method of determining the OVD that is considered relevant for Indonesian is the Niswonger and cephalometric radiography methods. This study was aimed to analyse the OVD before and after complete denture insertion with the Niswonger and cephalometric radiography methods. Methods: This research was quantitative with an observational analytic method and cross-sectional study design. Samples were patients at the University of Jenderal Sudirman (Unsoed) Purwokerto Dental Hospital (RSGM) who were selected by purposive total sampling method according to inclusion and exclusion criteria. All study subjects were measured the OVD before complete denture insertion using the Niswonger and cephalometric radiography methods. After the procedure of complete denture fabrication was completed and insertion carried out, the post-insertion OVD was then remeasured using the same methods. The results of OVD measurements before and after complete denture insertion were then compared and analysed. Results: The results of dependent t-test showed a significant difference in the OVD before and after complete denture insertion with the Niswonger and cephalometric radiography methods (p < 0.05). Conclusion: There was a decrease in the occlusal vertical dimensions before and after complete denture insertion with the Niswonger and cephalometric radiography methods.

Keywords: Complete denture, occlusal vertical dimension, Niswonger method, cephalometric radiography method.

Keywords

Gigi tiruan lengkap, dimensi vertikal oklusal, metode Niswonger, metode radiografi sefalometri, complete denture, occlusal vertical dimension, Niswonger method, cephalometric radiography method.

Full Text:

PDF

References

Anshary MF, Cholil, Arya IW. Gambaran pola kehilangan gigi sebagian pada masyarakat Desa Guntung, Ujung Kabupaten Banjar. Dentino J Ked Gi. 2014; 2(2): 138-43.

Badan Penelitian dan Pengembangan Kesehatan Kementerian Kesehatan Republik Indonesia. Riset Kesehatan Dasar (RISKESDAS) 2012-2013. Jakarta: Kementerian Kesehatan Republik Indonesia; 2013. h. 119.

Badan Penelitian dan Pengembangan Kesehatan Kementerian Kesehatan Republik Indonesia. Riset Kesehatan Dasar (RISKESDAS) 2007-2008. Jakarta: Kementerian Kesehatan Republik Indonesia; 2008. h. 131.

Nallaswamy D. Textbook of prosthodontics. 1st ed. New Delhi: Jaypee Brothers Medical Publishers (P) Ltd.; 2006. h. 4-241.

Mangkat Y, Wowor VNS, Mayulu N. Pola kehilangan gigi pada masyarakat Desa Roong Kecamatan Tondano Barat Minahasa Induk. J eG. 2015; 3(2): 508-14.

Ferro KJ, Morgano SM, Driscoll CF, Freilich MA, Guckes AD, Knoernschild KL, et al. The Glossary of Prosthodontic Terms. 9th ed. Amsterdam: Elsevier; 2017. h. 10-85.

Nurung M, Dharmautama M, Jubhari EH, Erwansyah E. Perbandingan antara teknik two dot dengan analisis sefalometri pada pengukuran dimensi vertikal oklusi. Dentofas. 2014; 13(3): 141-4.

Ladda R, Kasat VO, Bhandari AJ. A new technique to determine vertical dimension of occlusion from anthropometric measurement of interpupillary distance. J Clin Exp Dent. 2014; 6(4): e395-e399. DOI: 10.4317/jced.51671

Brar A, Mattoo KA, Singh Y, Singh M, Khurana PRS, Singh M. Clinical reliability of different facial measurements in determining vertical dimension of occlusion in dentulous and edentulous subjects. Int J Periodontol Restorat Dent. 2014; 4(3): 68-77.

Morais ECC, Ornaghi BP, Sponchiado AP, Zielak JC, da Costa RG, Bindo MJF, et al Determination of final occlusal vertical dimension by cephalometric analysis. Rev Sul-Brasileira Odontol. 2015; 12(2): 143-50.

Mathews L, Dhanraj. Knowledge, attitude, and technique in recording vertical dimension techniques. Int J Recent Adv Multidisipl Res. 2017; 4(4): 2465-7.

Jain CD, Bhaskar DJ, Agali C, Singh H, Gandhi R. Phonetics in dentistry. Int J Dent Med Res. 2014; 1(1): 31-7.

Boucher CO, Hickey JC, Zarb GA, Bolender C. Boucher’s prosthodontic treatment for edentulous patient. 9th ed. St. Louis: Mosby-Year Book; 1985. h. 458-78.

Patel M, Ponnanna AA, Tripathi G. Guiding intellect for occlusal errors. J Clin Diagn Res. 2013; 7(11): 2619-22. DOI: 10.7860/JCDR/2013/6183.3630

DOI: https://doi.org/10.24198/jkg.v31i1.18536