Pengaruh penambahan kitosan nano gel pada bahan basis gigi tiruan resin akrilik polimerisasi panas terhadap kekerasan: studi eksperimental laboratoris

Safutri Wulandari, Muhammad Zulkarnain

Abstract


ABSTRAK

Pendahuluan: Resin akrilik polimerisasi panas (RAPP) merupakan bahan yang banyak digunakan sebagai bahan basis gigi tiruan. Meskipun RAPP memiliki keunggulan, RAPP juga memiliki kekurangan yaitu sifat mekanis yang rendah yang terdiri dari kekuatan impak, transversal, kekerasan, dan mudah abrasi saat dibersihkan. Kekerasan berguna untuk memberikan indikasi ketahanan gores, dan ketahanan abrasi. Salah satu cara untuk meningkatkan kekerasan basis gigi tiruan resin akrilik polimerisasi panas dengan menambahkan bahan penguat seperti kitosan nano gel. Penelitian ini bertujuan untuk menganalisis pengaruh penambahan kitosan nano gel pada bahan basis gigi tiruan RAPP terhadap kekerasan. Metode: Rancangan penelitian adalah eksperimental laboratoris post-test only control group design dengan total sampel 30 buah berukuran (60x10x3) mm.  Kelompok dengan penambahan kitosan nano gel 0,5% (A), serta 1% (B) sebagai kelompok perlakuan, sedangkan yang tanpa penambahan nano gel sebagai kelompok kontrol (C). Kekerasan sampel kemudian diuji menggunakan Microhardness Vickers Tester. Data dianalisis menggunakan uji One-Way ANOVA dan LSD. Hasil: Nilai rata-rata kekerasan kelompok C, A dan B berturut-turut adalah 14,9 VHN, 15,2 VHN, dan 16,5 VHN. Penambahan kitosan nano gel pada RAPP dapat meningkatkan kekerasan secara signifikan (p=0,030) (p<0,05). Simpulan: Penambahan kitosan nano gel 1% dapat meningkatkan kekerasan pada bahan basis gigi tiruan RAPP

Kata kunci: kitosan nano gel, kekerasan, resin akrilik polimerisasi panas

The chitosan nano gel addition on the hardness of heat polymerization acrylic denture base resin: a laboratory experimental study

ABSTRACT

Introduction: a heat polymerized acrylic resin (HPAR) is a material that has such as low mechanical properties including impact strength, transverse, hardness, and easy abrasion when cleaned. Hardness is used to give an indication of the scratch, and abrasion resistance of a material. The effort to increase the hardness of heat polymerized acrylic denture base by adding a reinforcing material such as chitosan nano gel. Aim of this study is to analyze the effect of chitosan nano gel addition on the hardness of heat polymerized acrylic denture base resin. Method: The design of this study is an experimental laboratory post test only control group design with totally 30 samples (60 x 10 x 3) mm size. The group with the addition of chitosan nano gel 0.5% (A) and 1% (B) as the treatment group, while the group with no addition as the control. The hardness of the samples then tested using a Microhardness Vickers Tester.  The data were analyzed using one-way ANOVA and LSD tests. Result: The hardness average values of the group C, A and B were 14,9 VHN, 15,2 VHN, and 16,5 VHN respectively. The addition of chitosan nano gel to HAPR can significantly increase the hardness (p=0.030) (p<0.05). Conclusion: The addition of 1% nano gel kitosan can increase the hardness of heat polymerization acrylic denture base resin

Keywords: chitosan nano gel, hardness, heat-polymerized acrylic denture base resin



Keywords


kitosan nano gel, kekerasan, resin akrilik polimerisasi panas, chitosan nano gel, hardness, heat-polymerized acrylic denture base resin

Full Text:

PDF

References


DAFTAR PUSTAKA

Siagian KV. Kehilangan sebagian gigi pada rongga mulut. J e-Clinic (eCl) 2016;4(1):1-6. DOI: 10.35790/ecl.v4i1.12316

Kasuma N, Putri YG, Lipoeto I. Pengaruh Larutan Kopi Bubuk Robusta Terhadap Stabilitas Warna Pada Resin Akrilik Polimerisasi Panas. J B-Dent 2015 ; 2(1):23-8. DOI:10.33854/jbd.v2i1.11.g301

Manappallil, JJ. Basic Dental Materials. 4th Ed. New Delhi: Jaypee Brothers Medical Publisher (P) Ltd, 2013: 540-53

May LW, Seong LG. A Narrative Review of Different Types and Processing Methods of Acrylic Denture Base Material. Ann Dent UM 2018;25(2): 58-67. DOI: 10.22452/adum.vol25no2.7

Kangsudarmanto Y, Rachmadi P, Wayan I, Arya Kf. Perbandingan Perubahan Warna Heat Cured Acrylic Basis Gigi Tiruan Yang Direndam Dalam Klorheksidin Dan Effervescent (Alkaline Peroxide). Dentino J Ked Gi 2014;2(2):205–9.

Togatorop RS, Rumampuk JF, Wowor VNS. Pengaruh perendaman plat resin akrilik dalam larutan kopi dengan berbagai kekentalan terhadap perubahan volume larutan kopi. J e-GiGi (eG) 2017;(1):19-23. DOI: 10.35790/eg.5.1.2017.14738

Lubis MDO, Putranti DW. Pengaruh penambahan aluminium oksida pada bahan basis gigi tiruan resin akrilik polimerisasi panas terhadap kekerasan dan kekasaran permukaan. B-Dent J Ked Gi Universitas Baiturahmah 2019;6(1):1-8. DOI: 10.33854/jbd.v6i1.202.g173

ismiyati T. Pengaruh Campuran Kitosan dengan Bahan Basis Gigi Tiruan Resin Akrilik terhadap Pertumbuhan Candida Albicans, Kekuatan Transversal, Kekuatan Tarik, dan Kekerasan (Kajian in Vitro) [disertasi]. Yogyakarta: Universitas Gadjah Mada.; 2017: 1-244.

Shahabi M, Fzael SM, Rangrazi A. Incoporation of chitosan nanoparticle into a cold-cure orthodontic acrylic resin: effects on Mechanical Properties. J Biomimetics 2021;6(7):1-9. DOI: 10.3390/biomimetics6010007.

Fakhri E, Eslami H, Maroufi P, Pakdel F, Taghizadeh S, Ganbarov K, Yousefi M, Tanomand A, Yousefi B, Mahmoudi S, Kafil HS. Chitosan biomaterials application in dentistry. Int J Biol Macromol. 2020; 162: 956-74. DOI: 10.1016/j.ijbiomac.2020.06.211.

Kurniasari D, Atun S. Pembuatan dan Karakteristik Nanopartikel Ekstrak Etanol Temu Kunci (Boesenbergia pandurata) pada Berbagai Variasi Komposisi Kitosan. J Sains Dasar 2017;6(1):31-5. DOI: 10.21831/jsd.v6i1.13610

Ismiyati T, Siswomihardjo W, Soesatyo MHNE, Rochmadi R. Pengaruh Campuran Kitosan dengan basis gigi akrilik terhadap pertumbuhan Candida pada plat resin akrilik. Majalah Kedokteran Gigi Indonesia 2017;3(3): 2442-576. DOI: 10.22146/majkedgiind.23721

Nadia LMZ, Suptijah P, Ibrahim B. Produksi Dan Karakterisasi Nano Kitosan Dari Cangkang Udang Windu Dengan Metode Gelasi Ionik. JPHPI 2014;17(2):119-26.

Adiana ID, Abidin T, Agusnar H, Dennise. Nano gel transverse strength Effect Of Adding High Molecular Nanochitosan On Transverse Strength Of Heat Polymerised Polymethylmethacrylate Denture Base Resin. J. Evolution Med. Dent. Sci. 2017; 6(70): 4996-9. DOI: 10.14260/Jemds/2017/1085

lmiyah Z, Rohman J. Karakterisasi chitosan nanopartikel dari sisik ikan bandeng sebagai alternatif bahan pengawet ikan patin (Pangasius hypopthalmus) Segar. Medicra J Of Medical Laboratory Science 2020;3(1):12-20.

Yue X, Liu L, Wu Y, Liu X, Li S, Zhang Z, Han S, Wang X, Chang Y, Bai H, Chai J, Hu S, Wang H. Preparation and evaluation of chitosan-polyvinyl alcohol/polyhexamethylene guanidine hydrochloride antibacterial dressing to accelerate wound healing for infectious skin repair. Ann Transl Med. 2021; 9(6): 482. DOI: 10.21037/atm-21-509.

Adiana IK. Pengaruh Penambahan Kitosan Nano Gel terhadap Sifat Mekanis dan Stabilitas Warna Bahan Basis Gigi Tiruan Resin Akrilik Polimerisasi Panas [tesis]. Medan: FKG USU.;2016:71-87. Available from: https://repositori.usu.ac.id/handle/123456789/43889

Amer ZJA , Ahmed JK, Abbas SF. Chitosan/PMMA Bioblend for Drug Release Application. Int J of Engineering and Technology 2014; 4(5): 318-24.

Miftahullaila M, Sinamo S, Setiawan Y. Pengaruh perendaman basis gigi tiruan resin akrilik polimerisasi panas dalam perasan murni bawang putih (Allium sativum L.) terhadap kekerasan permukaan. Prima J Oral Dent Sci. 2021; 4(2): 45-50. DOI: 10.34012/primajods.v4i2.2478

Lubis MIA,Wahyuni S. Pengaruh perendaman gigi artifisial akrilik dalam ekstrak kulit manggis dan klorheksidin terhadap stabilitas warna: penelitian eksperimental laboratoris. J Ked Gi Unpad 2023;35(1):27-32. DOI: 10.24198/jkg.v35i1.41112




DOI: https://doi.org/10.24198/jkg.v35i3.50414

Refbacks

  • There are currently no refbacks.


Copyright (c) 2023 Jurnal Kedokteran Gigi Universitas Padjadjaran

INDEXING & PARTNERSHIP

     

      

     

 

Statistik Pengunjung

Creative Commons License
Jurnal Kedokteran Gigi Universitas Padjadjaran dilisensikan di bawah Creative Commons Attribution 4.0 International License